Lauten Audio LS-208

$599.00

or pay $99.83/month for 6 months* with the Providence Synchrony Card

Free shipping to the lower 48 states for orders of $99 and up.
Easy, Flexible Financing

We’ll match competitor 0% financing offers —
and accept most Synchrony cards.

Questions About This Product?

Call +1 (323) 617-9393

Chat with us

Email info@provsv.com

Lauten Audio LS-208 End-Address FET Condenser Microphone

The Lauten Audio LS-208 is an end-address cardioid FET condenser microphone designed for high-fidelity recording in acoustically challenging environments—untreated rooms, control rooms, or close-proximity tracking situations where off-axis rejection is critical. The 32mm cardioid capsule rejects off-axis sound from bandmates, ambient noise, room echo, and HVAC without requiring acoustic treatment or physical isolation, and two onboard filters allow immediate tonal shaping at the microphone before the signal reaches the preamp. With a dynamic range of 135dB minimum and maximum SPL exceeding 135dB, the LS-208 handles both delicate sources and high-level transients with a single cardioid capsule. It ships with a rugged flight case, shock mount, articulating swivel mount, and standard windscreen.

Key Features

  • End-address cardioid design with strong off-axis rejection — rejects off-axis sound sources including room reflections, HVAC noise, and nearby performers; suited to untreated spaces, control room tracking, and close-proximity recording without relying on acoustic treatment
  • 32mm FET capsule — end-address cardioid orientation; self-noise below 15dB-A; 135dB minimum dynamic range; maximum SPL exceeding 135dB
  • Two onboard filters — dedicated high-pass and low-pass filters for immediate tonal shaping at the source without additional processing in the signal chain
  • Articulating swivel mount included — provides flexible positioning for end-address placement across a variety of setups; shock mount and standard windscreen also included
  • Rugged flight case included

Specifications

  • Type: End-address pressure gradient FET condenser
  • Capsule: 32mm
  • Polar Pattern: Cardioid
  • Frequency Response: 20Hz–20kHz
  • Self-Noise: <15dB-A
  • Dynamic Range: 135dB minimum
  • Max SPL: >135dB (0.5% THD @ 1kHz)
  • Sensitivity: 5mV/Pa (–46dBV; ref 0dB = 1V/Pa @ 1kHz)
  • Output Impedance: >150Ω
  • Connector: 3-pin XLR
  • Power: 48V phantom power
  • Included: Rugged flight case; shock mount; articulating swivel mount; standard windscreen
Add a review
Lauten Audio LS-208 Lauten Audio LS-208
Overall rating*
0/5
* Rating is required
How would you rate the sonic performance of the product?
0/5
* Rating is required
How satisfied are you with the product at its price point?
0/5
* Rating is required
How would you rate your experience shopping with us?
0/5
* Rating is required
* Answer is required
* Answer is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please tick the checkbox to proceed
* Please confirm that you are not a robot
0.0
Based on 0 reviews
5
0%
4
0%
3
0%
2
0%
1
0%
0 of 0 reviews

Sorry, no reviews match your current selections

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. 
For more information go to www.P65Warnings.ca.gov.

Sign up for the
providence synchrony card

Get 6-Months Financing on qualifying purchases when you're approved for the Providence Synchrony Credit Card. Fill out the form below and an associate will reach out to you with more information.

set up a demo with providence sound and vision

Ready to try it in your studio?

Give us a call at (323) 617-9393 to set up a demo or fill out the form below and we'll reach out to you to get the demo process started.

Request a Shipping Quote

Interested in this piece of gear? Due to its size and weight, special shipping arrangements may be required. Fill out the form below and our team will provide you with a custom shipping quote and delivery details.

Contact Us To Order

Interested in this piece of gear? Due to the complexity of this product you’ll need to place an order with one of our Audio Consultants. Fill out the form below and we’ll reach out to you to get an order started with the manufacturer.

Contact Us To Order

Interested in this piece of gear? Fill out the form below and we’ll reach out to you to get an order started with the manufacturer.

rent the gear you need with providence sound and vision

Need a specific piece of gear for your next event, session or gig?

Give us a call at (323) 617-9393 to learn more about our rental program or fill out the form below and we'll reach out to you to get the rental process started.